Grass Valley iControl V.4.43 - Manual (Page 259)

iControl
User Guide
249
Figure 5-12
4. Double-click the Densité Manager row.
The Densité Manager control panel appears.
Figure 5-13
The Configuration tab contains a list of currently configured Densité Communicators. The
first time that you access the Densité Manager, this list will be empty. You must manually
add the IP address and name of each Densité frame that is to be controlled. The Status bar
located at the bottom of the control panel displays Error, Warning and Information
messages.
If you select a Densité Communicator (frame) from the list, you can take one of the following
actions:
List of active Densité
Communicators (frames)
Status bar
Current
Status