Grass Valley iControl V.4.43 - Manual (Page 542)

iControl and SNMP
Adding an Object from an SNMP Table
532
Figure 8-148
4. In the list that appears, find and select the MIB for the device you are working with.
Figure 8-149
5. Click OK.
The selected MIB is loaded and appears in the left column of the MIB Browser.
6. Find and select the parameter you wish to monitor in the hierarchy (tree) of the loaded MIB.
Note: If the MIB for the device you are working with is not on the Application
Server, use the
Load MIB command to browse elsewhere.