Grass Valley iControl V.4.43 - Manual (Page 33)

iControl
User Guide
23
• The Kaleido-Quad-Dual combines two independent, high-quality quad-split multi-image
display processors in a single 1RU frame for optimal space efficiency. The processor
has 2 x 4 auto-sensing HD-SDI/SDI/ Analog Composite video inputs, and 2 high-quality DVI
outputs with up to 1920 × 1080 or 1600 × 1200 pixels.
Imagestore
Miranda’s Imagestore devices deliver high performance, HD/SD master control switching with
HD/SD branding graphics capabilities, along with 5.1 audio mixing and storage. They offer
video and multi-channel audio mixing plus audio playout. High impact channel branding and
promotional graphics can be inserted by multiple independent keying layers. Each Imagestore
processor features independent HD/SD preview, clean-feed and auxiliary outputs. The
Imagestore series supports serial or Ethernet automation via a single interface. Integration
with iControl is achieved using the widely supported Oxtel protocol.
Allégro
Miranda’s Allégro is a 1 RU streaming encoder/server that allows real-time confidence
monitoring of remote signals. It combines encoder and server functions to enable low latency
streaming of video, audio and data over a standard IP network. Fully adapted to the
monitoring of critical broadcast signals, it integrates telemetry such as signal presence, VBI
extraction and audio level metering.
Multiple Allégro encoders can be managed remotely from a central location. Up to 16 local
and remote player clients can monitor the same signal. Streaming video for Allégro can be
fully integrated into iC Web, iC Router or Kaleido series products to optimize operator
effectiveness. With Allégro’s practical Quick Start menu and Web-based graphical user
interface, only a few clicks are required to get the unit ready for operation.
What’s New in iControl Version 4.43
Building on the success of previous versions, iControl version 4.43 is an important new release
of Miranda’s system for monitoring and control over IP. It reinforces the established position of
iControl as the industry standard for video network management. With its high-quality
streaming video, comprehensive support for all signal formats, and tight integration with
other vendors’ equipment and monitoring systems, iControl reduces mean-time-to-repair by
enabling end-to-end monitoring of even the most complex operations.
The following is a high-level overview of some important new features in iControl version 4.43.
Context-Sensitive Event Log Viewer of iC Web

[Ref. #ICONTROL-15850] In version 4.43 of iControl, opening the context-sensitive (device-
specific) Event Log Viewer in both iControl Navigator and iC Web now opens the full Log
Viewer window rather than the more limited version of it used in the past. By taking
advantage of the search filter features of the standard Log Viewer window, you can use any
parameter of any listed log entry as either a solitary search criterion or else to be added to
the existing search criteria of the current filter simply by right-clicking any cell of any log
listing.