Grass Valley iControl V.4.43 - Manual (Page 510)

iControl and SNMP
Creating a GSM SNMP Agent for an Individual Alarm
500
Creating a GSM SNMP Agent for an Individual Alarm
To create a GSM SNMP agent for an individual alarm
1. In the GSM Alarm Browser, select a GSM from the list on the left pane.
Figure 8-107
2. In the right pane, on the Main tab, navigate to − and right-click − the desired alarm, and
then click Properties.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have separately ordered and installed the SNMP Agent plug-in option. To order this,
contact Miranda Technical Support (see "Contact Us" , on page 761).
• You have opened iControl (see page 696 ).
• You have opened iC Navigator (see page 719 ).
• You have opened the GSM Alarm Browser (see "Opening the GSM Alarm Browser" , on
page 732).