Grass Valley iControl V.4.43 - Manual (Page 304)

Configuring Devices & Services
Upgrading Firmware on a Densité Card
294
3. Return to the iControl Startup page, click System Tools, and then click Firmware Update
Utility.
Figure 5-86
This opens the Miranda Interface Updater (MIU).
4. If prompted to open miu.jnlp , click OK.
5. A message window appears, warning you to make sure the Densité frame containing the
card to be updated is in Standby mode (refer to step 2 ).
Figure 5-87
6. Click OK to continue.
The Miranda Interface Updater (MIU) window appears.
7. Type the Densité frame’s IP address in the field provided, and then click Connect.