Grass Valley iControl V.4.43 - Manual (Page 514)

iControl and SNMP
Viewing the GSM SNMP Agent Alarms
504
Viewing the GSM SNMP Agent Alarms
Alarms located in the iControl folder of the GSM Alarm Browser are available for polling via the
GSM SNMP Agent. This folder contains the alarms associated with Densité and Imaging
devices—for the frames themselves and for the cards they contain.
To view a list of the alarms available for polling via the GSM SNMP agent
1. In the GSM Alarm Browser, double-click the iControl folder in the iControl alarms folder to
display its contents.
Figure 8-113
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iC Navigator (see page 719 ).
• You have opened the GSM Alarm Browser (see "Opening the GSM Alarm Browser" , on
page 732).
Note: You can double-click on subfolders to reveal their contents, and so on.
Ultimately, you will reveal all of the alarms available for polling via the GSM’s SNMP
agent. Each card has its own folder which contains all the alarms and statuses
provided by this card (some cards have multiple folders).