Grass Valley iControl V.4.43 - Manual (Page 393)

iControl
User Guide
383
To enable the display of alarm acknowledgement for a particular GSM Alarm
Browser
• In the GSM Alarm Browser, select Show status details.
Figure 7-46
Adding Alarm Providers
To have an alarm appear in the Alarm Browser hierarchy, you must first add an appropriate
alarm provider.
To add an alarm provider
1. In the GSM Alarm Browser, under Create new alarm provider, click an appropriate alarm
provider type, and then click New.
Note: Alarm acknowledgements are displayed immediately.
Note: When working with multi-instance plug-ins be careful not to create more
than one plug-in for the same device.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iControl Navigator (see page 719 ).
• You have opened the GSM Alarm Browser for the appropriate GSM (see page 732 .