Grass Valley iControl V.4.43 - Manual (Page 56)

Getting Started with iControl
Configuring TCP/IP Settings of a Client PC Running Windows 7
46
Perform one of the following procedures depending upon your client PC’s operating system:
• "Configuring TCP/IP Settings of a Client PC Running Windows 7" , on page 46
• "Configuring TCP/IP Settings of a Client PC Running Windows XP" , on page 49
Configuring TCP/IP Settings of a Client PC Running Windows 7
To configure TCP/IP settings of a client PC running Windows 7
1. From the Windows 7 Start menu, click Control Panel.
Figure 2-14
The Control Panel appears.
2. Click Network and Sharing Center.
Figure 2-15
The Network and Sharing Center appears.
3. In the Access type area, click the link that corresponds to your LAN Internet connection
(Local Area Connection in the example shown).