Grass Valley iControl V.4.43 - Manual (Page 419)

iControl
User Guide
409
Figure 7-87
2. Click Remove plug-in.
A confirmation window appears.
Figure 7-88
3. Click Yes.
Displaying Alarm Status Details
To enable the display of alarm status details in a GSM Alarm Browser
• In the GSM Alarm Browser, select Show status details.
All alarms in the GSM Alarm Browser display their current, latched and acknowledgment
status components (see
"Alarm Component Appearance" , on page 348).
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iControl Navigator (see page 719 ).
• You have opened the GSM Alarm Browser (see page 732 ).