Grass Valley iControl V.4.43 User Manual
Page 622
Backup and Redundancy
Reconfiguring an Offline, Configured Main Application Server in a Backup Role
612
Figure 10-34
11. If you are performing this procedure with only one configured Main and one configured
Backup, (that is, only A1 and A2 in the Redundancy Group), perform the following steps:
a) In your browser’s address bar, type the IP address of A2.
b) Navigate to the Redundancy Configuration Form (see
c) Click Click here to create a new Redundancy Group with this server as a MAIN.
The Redundancy Configuration Form refreshes, displaying A2 in the Main area.
d) In the Backup area, type the IP address of A1.
e) Click Add this Backup (next to the IP address you just typed).
The Redundancy Configuration Form refreshes, displaying A1 has been added to the
Backup area.
12. If your Redundancy Group has more Application Servers than just A1 and A2, perform the
following steps:
a) In your browser’s address bar, type the IP address of one of the Application Servers
(neither A1 nor A2) still remaining in the Redundancy Group.
b) Navigate through Webmin to the Redundancy Configuration Form (see
).
c) In the Main area, type the IP address of A2.
d) Click Add this Main (next to the IP address you just typed).
The Redundancy Configuration Form refreshes, displaying A2 has been added to the
Main area.
e) In the Backup area, type the IP address of A1.
f ) Click Add this Backup (next to the IP address you just typed).
The Redundancy Configuration Form refreshes, displaying A1 has been added to the
Backup area.