Grass Valley iControl V.4.43 User Manual
Page 303
iControl
User Guide
293
specific card, and to obtain the update package, please contact Miranda Technical Support
(see
To upgrade the firmware on a Densité card
1. In iC Navigator, double-click a Densité Manager.
The Densité Manager control panel window appears.
Figure 5-84
2. Select the Densité frame that contains the card to be updated, and then click Standby.
A confirmation message appears at the bottom of the window.
Figure 5-85
Note: The firmware update package you receive from Miranda Technical Support
will be in the form of a ZIP archive (e.g.
FirmwareUpdate.zip
) containing another ZIP
archive (e.g.
XXXX‐XXXX‐XXX.zip
). If this is the case, you will need to extract
XXXX‐XXXX‐XXX.zip
from
FirmwareUpdate.zip
, but stop there. Do not extract the
contents of
XXXX‐XXXX‐XXX.zip
.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see
• You have opened iC Navigator (see
).