Grass Valley iControl V.4.43 - Manual (Page 58)

Getting Started with iControl
Configuring TCP/IP Settings of a Client PC Running Windows 7
48
Figure 2-18
5. Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
The Internet Protocol Version 4 (TCP/IPv4) Properties window appears.
Figure 2-19
6. Take note of the PC’s current settings.
7. Click Use the following IP address.
8. The default IP address of each new iControl Application Server is 10.0.3.6 . On the
client PC, type an address in the same range (e.g. 10.0.3.10 ) in the IP address field.