Grass Valley iControl V.4.43 - Manual (Page 227)

iControl
User Guide
217
Configuring Settings for Loudness Logger Alarms
In order to publish Loudness Logger alarms to GSM you must perform this procedure.
To configure settings for loudness alarms
1. In Loudness Logger, click Settings.
Figure 4-166
The Loudness Logger Settings window appears.
2. Click Configure.
Figure 4-167
The Loudness Logger Alarm Configuration window appears.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened Loudness Logger (see page 727 ).