Grass Valley iControl V.4.43 - Manual (Page 508)

iControl and SNMP
Creating a GSM SNMP Agent for all Alarms
498
Figure 8-104
5. Enter values for the following parameters depending upon your needs:
An icon labeled SNMP Agent appears in the Global actions list.
To do this... ...do this...
Configure an SNMP agent. 1. In the SNMP Agent Configuration window, type a name for this plugin.
2. In the Community box, type an SNMP community string.
Only client requests with identical text are processed.
By default, the value is set to public .
3. In the Port list, select the Application Server port number to which the agent
listens for client requests. 1
4. In the Trap configuration area, click Add.
5. In the trap target that appears, in the Host column, type an IP address for the trap
target.
6. In the same row (same trap target), in the Port column, type the trap target’s port
number to which the trap will be sent.
7. [OPTIONAL] In the same row, in the Description column, type a description of the
trap target.
8. Specify the trap version.
9. Assign a trap number (used to identify this trap from others).
10. Click OK.
1. Make sure the port is not already being used by another process running on the same Application
Server.
Remove a trap target from
an SNMP agent. 1. In the SNMP Agent Configuration window, in the Trap targets list, select the
target you would like to remove.
2. Click Remove.
3. Click OK.