Grass Valley iControl V.4.43 - Manual (Page 424)

Alarms in iControl
Working with Operational Modes
414
Working with Operational Modes
Setting an Alarm’s Operational Mode
To edit an alarm’s Offline, In maintenance, or Inverted mode
• Right-click the alarm, point to Operational mode, and then click one of Offline, In
maintenance, or Inverted.
The color of the alarm’s status icon changes to a darker shade, and the text label (if any)
becomes orange.
Figure 7-93
See also
For more information about:
• filtering log searches with multiple criteria, see page 151 .
• filtering log searches using textual elements as criteria, see page 156
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• If you are working in iC Web, make sure you have opened the appropriate iControl Web
page (see "Working with iC Web" , on page 741).
• If you are working in iC Navigator, make sure you fulfill the following conditions before
beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iControl Navigator (see page 719 ).
See also
For more information about:
• the Inverted operational mode, see "Inverted" , on page 357
• manual alarm inversions, see "Manual Alarm Inversions" , on page 372 and "Inverting
Alarms Manually" , on page 419
• scheduling inversion actions, see "Setting a Schedule for an Alarm Inversion" , on
page 424