Grass Valley iControl V.4.43 - Manual (Page 306)

Configuring Devices & Services
Upgrading Firmware on a Densité Card
296
12. Repeat step 8 to step 11 if necessary to upgrade other cards in the same Densité frame.
13. When all cards have been successfully updated, click Disconnect, and then close the
Miranda Interface Updater window.
14. Return to iC Navigator. In the Densité Manager control panel window, select the Densité
frame that was put in Standby mode in step 2 , and then click Online.
Figure 5-89
A confirmation message appears at the bottom of the window.
Figure 5-90