Grass Valley iControl V.4.43 - Manual (Page 65)

iControl
User Guide
55
• Username: miranda
• Password: icontrol
4. Click Login.
The iControl Webmin home page appears.
Figure 2-28
Configuring the Network
When configuring your network you must configure host addresses, DNS client, Gateway, and
network interfaces in the proper sequence.
To configure the network
1. Specify the DNS settings to be used by your Application Server (see page 56 .
2. Configure your host addresses (see page 58 ).
3. Specify a network Gateway to be used by your Application Server (see page 59 ).
4. Configure the Ethernet interface (see page 60 ).
5. Restart and verify the configuration (see "Restarting the Application Server" , on page 62).
Navigating to the Network Configuration Page
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You you have opened iControl (see page 696 ).
• You are logged on to iControl Webmin (see page 701 ).