Grass Valley iControl V.4.43 - Manual (Page 409)

iControl
User Guide
399
To enable the display of alarm acknowledgement for a particular GSM Alarm
Browser
• In the GSM Alarm Browser, select Show status details.
Figure 7-71
Acknowledging an Individual Alarm
To acknowledge an individual alarm
1. If you would like to acknowledge an alarm with the GSM Alarm Browser, perform the
following steps:
a) Open the GSM Alarm Browser for the appropriate GSM (see page 732 ).
b) Right-click the alarm and click Acknowledge.
Note: Alarm acknowledgements are displayed immediately.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iC Navigator (see page 719 ).