Setting up the panel application, Pm designer operation manual – B&B Electronics WOP-2121V-N4AE - Manual User Manual
Page 62
4
3
PM Designer Operation Manual
3-1
CHAPTER 3 CREATING PANEL APPLICATIONS
3.1. Setting up the Panel Application
You can set up the panel application with the General Setup dialog box. There are five ways to open the dialog box:
1)
In the PM Designer's Project Manager tool window, double-click the Panel Application node (
).
2) In the PM Designer's Project Manager tool window, right-click the Panel Application node (
) to bring out the
popup menu and select General Setup menu item.
3)
In the PM Designer's Project Manager tool window, double-click the General Setup Node (
) in Panel Application >
Setup
4) In the PM Designer's Project Manager tool window, right-click the General Setup Node (
) in Panel Application >
Setup to bring out the popup menu and select Properties menu item.
5) In the PM Designer's menu bar, click Panel to bring up the Panel sub-menu. Click General Setup…in the Panel
sub-menu.
The General Setup dialog box contains the following pages. Some of the pages appear only when they are needed.
.
■ Custom
Described in
■ Keys
Described in
■ Startup Macro / Main Macro / Event Macro / Time Macro
Described in
Section 14.2.6.