B&B Electronics WOP-2121V-N4AE - Manual - Manual (Page 141)

4 4
PM Designer Operation Manual
4-19
CHAPTER 4 DESIGNING SCREENS
8. Double-click the polygon to bring up the Polygon dialog box and then modify the settings of the polygon.
The following table describes each property in the Polygon dialog box.
Property Description
Color
Controlled By
Bit
Check this option if the color of the polygon will be controlled by the specified
bit.
Control Bit
Specifies the bit that controls the color.
Click to enter the bit address. Click to enter the bit tag.
Color
Control
State Select the state that you want to view or define the colors for.
Outlined Check this option if you want the polygon to be outlined.
Thickness Specifies the thickness of the outline.
Outline
Color Specifies the outline color for the selected state.
Solid
Check this option if you want the polygon to be solid. A solid polygon is filled
with the specified pattern and colors.
Pattern Specifies the fill pattern for the selected state.
FG Color
Specifies the color for the selected state that will be used for painting the black
part of the fill pattern.
Solid
BG Color
Specifies the color for the selected state that will be used for painting the white
part of the fill pattern.
Continued