B&B Electronics WOP-2121V-N4AE - Manual - Manual (Page 188)

5
PM Designer Operation Manual
5-8
CHAPTER 5 BUTTONS AND SWITCHES
Property Description
Click this button to change the object state to 1 (On) so you can view and set the
object appearance for state 1 (On).
Click this button to change the object state to 0 (Off) so you can view and set the
object appearance for state 0 (Off).
Write Address Specifies the bit variable to be operated.
Click this icon to bring up the Address Input Keypad and specify a bit address for the
Write Address field.
Write
Address
Click this icon to bring up the Select Tag dialog box and select a bit tag for the Write
Address field.
Monitor Address identical to
Write Address
Specifies that the Monitor Address is identical to the Write Address. With this item
checked, you don’t need to specify the Monitor Address again. This item is available
when the option Monitor is checked.
Monitor Address Specifies the bit variable to be monitored.
Click this icon to bring up the Address Input Keypad and specify a bit address for the
Monitor Address field.
Monitor
Address
Click this icon to bring up the Select Tag dialog box and select a bit tag for the
Monitor Address field.
ON Macro
Check this option if you want the button to have an ON macro. Specify and edit the
ON macro in the ON Macro page.
OFF Macro
Check this option if you want the button to have an OFF macro. Specify and edit the
OFF macro in the OFF Macro page.
Key
The hard key that is used to operate the object. This item is available only when the
target panel has hard keys.