B&B Electronics WOP-2121V-N4AE - Manual - Manual (Page 365)

11
PM Designer Operation Manual
11-12
CHAPTER 11 ALARMS AND ALARM DISPLAYS
Property Description
Check this option if you want the operator to acknowledge an alarm. When an
alarm become active, the panel display alarm message or screen with ACK button
if Required Acknowledgement is selected. The operator should press the ACK
button to acknowledge the alarm and have the panel start to refresh the current
screen again. This field is available when either Display message or Display
screen is selected.
Record ACK Check this option if you want to record ACK in the alarm display object
Notification Check this option if you want to notify the specified bit when the ACK button is
clicked.
Required
Acknowledge-
ment
Bit Specifies the bit that receives the notification.
Check this option if you want to display a screen when you select the
corresponding alarm on the alarm display object. Tip Screen
Select a window screen as the tip screen
Play multimedia Check this option if you want the panel to play multimedia when the alarm is active
or clear.
File Name Specifies the file name of the multimedia