Pm designer operation manual – B&B Electronics WOP-2121V-N4AE - Manual User Manual
Page 176

4
PM Designer Operation Manual
4-54
CHAPTER 4 DESIGNING SCREENS
4.3.3. Advanced Settings
This section describes how to define the advanced settings for the following types of objects:
Bit Button, Toggle Switch, Screen Button, Function Button, Slide Switch, Word Button, Multi-state Switch, Radio
Button Group, Step Button, Advanced Numeric Display, ASCII String Entry, and Recipe Selector.
You can use the Advanced page in an object's property sheet to define the advanced settings of that object.
The following are examples of the Advanced page for different objects:
For an advanced numeric display.
For a bit button.
The following table describes each property in the Advanced page.
Property
Description
Enabled by Bit
Check this option so the touch operation of the numeric entry will be enabled and
disabled by the specified bit.
Control Bit
Specifies the bit that enables and disables the touch operation. Click
to enter a
bit address. Click
to select a bit tag.
Enabling State
Specifies the state (On or Off) that enables the touch operation.
Enabled by
User Level
Check this item so the touch operation of the numeric entry will be enabled and
disabled by the current user level.
Lowest
Enabling User
Level
Specifies the lowest user level that is required to enable the touch operation.
Touch
Operation
Control
Show Disabled
Sign
Check this option so the touch operation disabled sign will be shown on the numeric
entry when the touch operation is disabled.
Continued