B&B Electronics WOP-2121V-N4AE - Manual - Manual (Page 359)

11
PM Designer Operation Manual
11-6
11.4. Discrete Alarm Blocks
You can set up a discrete alarm block with the Discrete Alarm Block dialog box. There are two ways to open the dialog box:
1) In the PM Designer's Project Manager window, move the mouse to the node of the desired discrete alarm block and
double click the node or right-click the node and then select Properties.
2) In the PM Designer's menu bar, click Panel to bring up the Panel sub-menu. Click Discrete Alarm Block in the Panel
sub-menu to bring up the Discrete Alarm Block pop-up menu. Select Properties in the pop-up menu to bring up the
discrete alarm block list of the current panel application. Select the desired discrete alarm block in the list.
11.4.1. Settings
Use the dialog box to define all the settings for a discrete alarm block. The following is an example of the discrete alarm
block dialog.
CHAPTER 11 ALARMS AND ALARM DISPLAYS