Pm designer operation manual – B&B Electronics WOP-2121V-N4AE - Manual User Manual
Page 101
3
PM Designer Operation Manual
3-40
CHAPTER 3 CREATING PANEL APPLICATIONS
Property
Description
Print Screen (#8)
Check this option so you can use command flag #8 to request the panel to
print the specified screen.
You need to specify the following:
1) Parameter One Register: the number of the screen to be printed
Note1: the top screen is printed if the number is zero or there is no
Parameter One Register.
Note2: the operation of printing a screen that is not the top screen is not
supported by PL035/037/057/058
Backlight On (#9)
Check this option so you can use command flag #9 to request the panel to
turn its backlight on.
Backlight Off (#10)
Check this option so you can use command flag #10 to request the panel to
turn its backlight off.
Set Current User Level
(#11)
Check this option so you can use command flag #11 to request the panel to
set the current user level to the specified one.
You need to specify the following:
1) Parameter One Register: the user level
Close All Window Screens
(#12)
Check this option so you can use command flag #12 to request the panel to
close all window screens.
Command
Flag
Execute General
Command (#15)
Check this option so you can use command flag #15 to request the panel to
perform the specified operation. See the
for details.