B&B Electronics WOP-2121V-N4AE - Manual - Manual (Page 124)

4
PM Designer Operation Manual
4-2
CHAPTER 4 DESIGNING SCREENS
4.1.1. Drawing Dots
1. In the Draw menu or Draw toolbar, click Dot .
2. Move the cursor onto the screen where you want to draw a dot. A dot with default settings will display and move
along with the cursor.
3. Click the desired position on the screen to place the dot. The center of the dot will be at the clicked position.
4. Double-click the dot to bring up the Dot dialog box and then modify the settings of the dot.
The following is an example of the Dot dialog box.
The following table describes each property in the Dot dialog box.
Property Description
Style
Select one of the dot styles listed below:
Color Specifies the dot color.
X Specifies the X coordinate of the upper-left corner of the dot.
Position
Y Specifies the Y coordinate of the upper-left corner of the dot.
5. You can click the following icons in the Draw toolbar to modify the properties of the dot.
Click Icon To
Select a style for the dot.
Select a color for the dot.