B&B Electronics WOP-2121V-N4AE - Manual - Manual (Page 318)

9
PM Designer Operation Manual
9-8
CHAPTER 9 ANIMATED OBJECTS
Property Description
Monitor Address Specifies the variable that controls the dynamic circle.
Click to enter an address for this field. Click to select a tag for this field.
The following table shows the data arrangement of the variable.
Data Type
Controllable
16-Bit Unsigned Int.
16-Bit Signed Int.
16-Bit BCD
32-Bit Unsigned Int.
32-Bit Signed Int.
32-Bit BCD
Center
Radius
FG Color
W0 FG Color W0,1 FG Color
Center
Radius
FG Color
W0 Radius W0,1 Radius
Center
Radius
FG Color
W0 Radius
W1 FG Color
W0,1 Radius
W2,3 FG Color
Center
Radius
FG Color
W0 X
W1 Y
W0,1 X
W2,3 Y
Center
Radius
FG Color
W0 X
W1 Y
W2 FG Color
W0,1 X
W2,3 Y
W4,5 FG Color
Center
Radius
FG Color
W0 X
W1 Y
W2 Radius
W0,1 X
W2,3 Y
W4,5 Radius
Center
Radius
FG Color
W0 X
W1 Y
W2 Radius
W3 FG Color
W0,1 X
W2,3 Y
W4,5 Radius
W6,7 FG Color
Note: About the color values, see ?, ?.
Center Check this option when you want to control the center.
Radius Check this option when you want to control the radius.
Controllable
FG Color Check this option when you want to control the FG color. This option is available
when the Circle is Solid and the Pattern is not the solid white.
Check this option if you want the dynamic circle to be filled with the selected
pattern.
Pattern Select a pattern for filling the dynamic circle.
FG Color Select a color for painting the black part of the pattern. This item is available when
the Pattern is not solid white.
Solid
BG Color Select a color for painting the white part of the pattern.
Check this option if you want the dynamic circle to have a border.
Circle
Border
Border Color The border color.