B&B Electronics WOP-2121V-N4AE - Manual - Manual (Page 184)

5
PM Designer Operation Manual
5-4
CHAPTER 5 BUTTONS AND SWITCHES
5.1.4. General Settings
This section describes how to define the general settings for the bit buttons in the General page of the Bit Button property
sheet. The following is an example of the General page.
The following table describes each property in the General page.
Property Description
ID The object’s identifier. It is generated when the object is created. The identifier is unique within
the screen where the object is on. The format of the ID’s for the bit buttons is BBnnnn.
Note You can type a note for the bit button.
Shape settings For details about the following properties, see Section 4.3.1.4 Setting up the Shape of an
Object. Picture Shape, , VFTA, , Border Color, Pattern, FG Color, BG
Color
External Label Check this option if you want the bit button to have an external label. Set up the external label
in the External Label page.
Click this button to change the object state to 1 (On) so you can view and set the object
appearance for state 1 (On).
Click this button to change the object state to 0 (Off) so you can view and set the object
appearance for state 0 (Off).
Continued