B&B Electronics WOP-2121V-N4AE - Manual - Manual (Page 209)

4 5
PM Designer Operation Manual
5-29
CHAPTER 5 BUTTONS AND SWITCHES
the list box.
5.7.2. Operation Options
The following operation options can be added to a multi-state switch to make it more informative, secure, and useful. You
need to select and set these options in the Multi-state Switch dialog box.
Options Description
Touch Operation
Control The touch operation can be enabled and disabled either by a specified bit or by the current
user level. Select and set this option in the Advanced page.
Minimum Hold Time The touch operation of the switch will not be activated until the switch is pressed and held
down for the specified time period (Minimum Hold Time). Set this option in the Advanced
page.
Notification The switch can be configured to notify a bit of the completion of the specified operation.
Select and set this option in the Advanced page.
Operation Logging Each data change performed by the switch can be recorded in the operation log. Select and
set this option in the Advanced page.
Invisible The switch can be invisible and still touch operable. Select this option in the Visibility page.
Visibility Control The switch can be shown or hidden either by a specified bit or by the current user level.
Select and set this option in the Visibility page.
5.7.3. Settings
You can complete all the settings of a multi-state switch in the Multi-state Switch dialog box. This dialog box contains the
following six pages. Some of the pages appear only when they are needed.
■ General
Described in Section 5.7.4.
■ Text
Described in Section 4.3.1.6.
■ Picture
Described in Section 4.3.1.7.
■ Advanced
Described in Section 4.3.3.
■ Visibility
Described in Section 4.3.4.
■ External Label
Described in Section 4.3.1.8.