Setting up a screen, Section 3.9.3 setting up a screen, Section 3.9.3 – B&B Electronics WOP-2121V-N4AE - Manual User Manual
Page 114: Pm designer operation manual
4
3
PM Designer Operation Manual
3-53
CHAPTER 3 CREATING PANEL APPLICATIONS
■ Activating Screens after Opening
To uncover any screen that is partially or completely obscured by other screens, you can do one of the followings:
1)
In the Project Manager tool window, double click the screen which is not on the top.
2)
On the Window menu, click the screen you need to activate. Or click Windows… to bring out the Windows dialog box.
In the Windows dialog box, select the screen and then click Activate button.
3)
Click anywhere on the screen. If the screens are maximized, click on the title tab of the screen.
3.9.3. Setting up a Screen
You can set up the screen with the Screen Properties dialog box.
To set up a screen, right click the panel application > Screens > screen you want to set up in the Project Manager tool
window, and then click Properties on the popup menu.
To set up a current screen, an opened screen which is on the top, you can do one of the followings:
1)
In the Project Manager tool window, double click the current screen.
2)
Right click the blank area on the current screen, and then click Screen Properties… on the popup menu.
3)
On the Screen menu, click Screen Properties…
The Screen Properties dialog box contains the following pages. Some of the pages appear only when they are needed.
.
■ Background
Described in
■ Keys
Described in
■ Open Macro / Close Macro / Cycle Macro
Described in
Section 14.2.6.