B&B Electronics WOP-2121V-N4AE - Manual - Manual (Page 171)

4 4
PM Designer Operation Manual
4-49
CHAPTER 4 DESIGNING SCREENS
Property Description
Transparent Check this item to make parts of the current picture transparent. The transparent parts are pixels
whose colors are identical to the specified transparent color. This item is available when the current
picture is not a black and white picture.
Transparent
Color The transparent color.
FG Color The color to paint the black part of a black and white picture. This item is available when the current
picture is a black and white picture.
BG Color The color to paint the white part of a black and white picture. This item is available when the current
picture is a black and white picture.
Flip/Rotate Specifies the method to flip or rotate the current picture before drawing it. There are 8 options:
Method Description
0° Do nothing
90° Rotates the picture clockwise by 90 degree
180° Rotates the picture clockwise by 180 degree
270° Rotates the picture clockwise by 270 degree
X Flips the picture over X axis
90° & X Rotates the picture clockwise by 90 degree and flips it over X Axis
Y Flips the picture over Y axis
90° & Y Rotates the picture clockwise by 90 degree and flips it over Y Axis
Tone Check this item to tone the current picture.
Toning Color The color to tone the current picture.
Fit to Object Check this item so the current picture can change its size automatically to just fit inside the border of
the object’s shape.
Position The position of the current picture within the object.
Shape BG
Color The BG color of the object’s shape for the current state.
4.3.1.8. External Label Settings
This section describes how to set up the external label for the following types of objects:
Bit Button, Toggle Switch, Screen Button, Slide Switch, Word Button, Multi-state Switch, Radio Button Group, Step
Button, Numeric Entry, Numeric Display, Advanced Numeric Display, ASCII String Entry, ASCII String Display, Bit
Lamp, Multi-state Lamp, Message Display, Picture Display, and Bar Graph.
You can use the External Label page in an object's property sheet to set up the external label of that object. The following
is an example of the External Label page.