Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 984)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
968 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Fix endpoint evaluation
Fix endpoint evaluation
on | off (Default value: off)
If this option is activated, then the associated values for the other measured
quantities will be interpolated with a fixed measured quantity (Measured
value or Time) for the fix endpoint from the measuring point list.
Moves the selected line up (changes the sequence).
Moves the selected line down (changes the sequence).
[New]
Opens the dialog window Fix endpoint evaluation # to enter a new fix
endpoint (see Chapter 5.6.4.13.5, page 970).
[Properties]
Opens the dialog window Fix endpoint evaluation # to edit the fix end-
point selected in the table (see Chapter 5.6.4.13.5, page 970).
[Delete]
Deletes the selected line.
Minimum evaluation
Minimum evaluation
on | off (Default value: off)
If this option is enabled, then the associated time for the minimum measured
value will be interpolated from the measuring point list.
Threshold value
The evaluation of the minimum begins as soon as the slope of the curve
exceeds the set threshold value.
Range 0.1 ... 1000.0 mAU/s
Default value 20.0 mAU/s
Maximum evaluation
Maximum evaluation
on | off (Default value: off)
If this option is enabled, then the associated time for the maximum measured
value will be interpolated from the measuring point list.