Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 57)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 41
Identifica-
tion Description Commands
.TC.C4 Coefficient of the Chebyshev poly-
nomial of conductivity of the fourth
order MEAS Cond,
MEAS TC Cond
.TC.MIN Minimum temperature coefficient
of the conductivity in %/°C MEAS TC Cond
.TC.MAX Maximum temperature coefficient
of the conductivity in %/°C MEAS TC Cond
.TC.TSTART Start temperature in °C MEAS Cond,
MEAS TC Cond
.TC.TSTOP Stop temperature in °C MEAS Cond,
MEAS TC Cond
.TITER Titer value of the solution used for
the command DET, MET, SET,
KFT, STAT,
STDADD dos,
STDADD auto,
ADD, DOS, LQH
.TOL Tolerance within which a measured
peak can be assigned to a calibra-
tion wavelength. CAL Spec
.TOU Timeout status: 1 = Timeout
expired; 0 = Timeout not
expired RECEIVE, TRANS-
FER, SCAN
.UNI Mapping unit which is defined in
the configuration for an IO port
(Text) ANALOG IN,
ANALOG OUT
.VAL Value of the command variables
(optional, i.e. Command-
name.Portname' =Command-
name.Portname.VAL') (Num-
ber). The value returned is the value
after the ending of the command. ANALOG IN,
ANALOG OUT,
DIGITAL IN, DIG-
ITAL OUT
.VAR Variance of the calculated result of
the standard addition in the selec-
ted unit STDADD
.VOL Dosed volume STDADD, ADD,
DOS, LQH