Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1134)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1118 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Statistics
on | off (Default value: on)
Mean value, absolute and relative standard deviations are calculated for the
result if this option is enabled. Statistical calculations are only carried out if
statistics is also activated in the START command and in the Run window.
Description
Freely selectable entry of a description of the result.
Input 1024 characters
[Save as template]
Open the dialog window Save result template in order to save the result
parameters as template for the creation of new results (see Chapter
5.6.8.2.6.2, page 1122).
5.6.8.2.5.2 Result - Monitoring
Tab: Method ▶ CALC ▶ Properties... ▶ [New] ▶ [Continue] ▶ Result - Monitoring
The parameters for monitoring the result are defined on this tab.
Result monitoring
Result monitoring
on | off (Default value: off)
The question of whether the result is within the defined limit values is moni-
tored while calculating the result during the determination if this option is
enabled.
Lower limit
Lower limit for the result.
Input 10 digits
Upper limit
Upper limit for the result.
Input 10 digits
Message
Message
The message defined here can be put out to different targets if the upper
limit is exceeded or if the lower limit is not reached. The text editor for
entering or changing the message is opened with or by double-clicking