Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1216)

6.2 Administration ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1200 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
removed
Users with the status removed can no longer log in. If the status of a
user is changed from activated or deactivated to removed, then the
user is automatically moved to the group Removed users. If a removed
user is subsequently again given the status activated or deactivated
then a dialog window appears for selecting the group to which the user
is to be assigned.
Start password
The invisible start password is shown with 6 * characters and must be
entered the first time that a new user logs in or after a change in status from
deactivated or removed to activated. The Administrator must issue a
new start password when adding a new user or after a change in status to
activated. If the user has logged in with the start password and then
entered a new password, then the start password is deleted again.
Input 50 characters
[Set start password]
Opens the dialog window Start password. This button is enabled only for
users with the status activated. If a user has forgotten his/her password
then the Administrator can issue a new start password here.
User group
Current user group. The administrator can modify the group assignment of
the user. The user is automatically moved to the new group. A user can also
be moved to a new group with Drag&Drop.
Selection Selection of the defined user group
Remarks
Optional entry of additional information for the user (e.g. function, address).
Input 1000 characters
6.2.1.3.2 Add user
Dialog window: Configuration ▶ Tools ▶ User administration ▶ [Add user] ▶ Add
user
There are two ways of adding a new user:
￭ Select user group and the context-sensitive menu item Add user.
￭ Select user group and press the [Add user] button.
In both cases this opens the dialog windowAdd user.