Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1223)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1207
Range 1 ... 999 Days
Default value 365 Days
FDA default: 365 days
6.2.2.3 Test login for password monitoring by Windows
Tab: Configuration ▶ Tools ▶ Security settings ▶ Login/Password protection ▶ Test
login
The user's Windows password must be entered in this dialog window when
switching on the option Password monitoring by Windows(see Chapter
6.2.2.2, page 1202). The test login will be used to check whether the user
name matches the Windows user name.
User
Shows the current user name.
Windows password
Entry of the Windows password.
It is only if when the test login is successful that the Password monitoring
by Windows can be used.
6.2.2.4 Audit Trail/Modifications
Tab: Configuration ▶ Tools ▶ Security settings ▶ Audit Trail/Modifications
Audit Trail recording is enabled and disabled on the Audit Trail/Modifi-
cations tab. When a method, determination or sample data is modified,
you can also define whether or not a reason must be given for the modifi-
cation together with comments.
Settings according to 21 CFR 11
[Set]
Sets the parameters to default settings for FDA-compliant work.
Audit Trail
Enable Audit Trail
If this check box is enabled then all program actions will be automatically
recorded; these are defined as Audit Trail actions.
Selection on | off
Default value off
FDA default: on