Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 212)

4.3 Manage databases ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
196 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Note
Make sure that you have read and write access rights on the selected
directory.
4.3.5.5 Database properties - Monitoring
Dialog window: Database ▶ File ▶ Database manager... ▶ Database man-
ager ▶ [Properties] ▶ Properties - Database ▶ Monitoring
Defines database monitoring.
Monitoring size
on | off (Default value: off)
Enables/disables size monitoring for the selected database. If this check box
is activated then the field Size in the Database table will be shown in red
when the limit value has been exceeded. A corresponding message also
appears when the database is opened.
Maximum size
Maximum permitted database size in MB.
Range 1 ... 2147483647 MB
Default value 10 MB
Monitoring number of records
on | off (Default value: off)
Enables/disables the monitoring of the number of data sets for the selected
database. If this check box is activated then the field Number in the Data-
base table will be shown in red when the limit value has been exceeded. A
corresponding message also appears when the database is opened.
Maximum number
Maximum permitted number of data sets for database.
Range 1 ... 2147483647
Default value 1000
4.3.6 Backup database manually
Dialog window: Database ▶ File ▶ Database manager… ▶ Database man-
ager ▶ [Backup] ▶ Database backup
[Backup] is used to open the dialog window Backup database: