Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 122)

3.3 Sample tables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
106 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Copy automatically into next line
Method
on | off (Default value: on)
If this option is enabled, then the content of this field will automatically be
filled with the content of the previous line when a new sample data line is
created.
ID1 … ID3
on | off (Default value: on)
If this option is enabled, then the content of this field will automatically be
filled with the content of the previous line when a new sample data line is
created.
ID4 … ID16
on | off (Default value: off)
If this option is enabled, then the content of this field will automatically be
filled with the content of the previous line when a new sample data line is
created.
Sample size
on | off (Default value: off)
If this option is enabled, then the content of this field will automatically be
filled with the content of the previous line when a new sample data line is
created.
Sample size unit
on | off (Default value: on)
If this option is enabled, then the content of this field will automatically be
filled with the content of the previous line when a new sample data line is
created.
Sample position + 1
on | off (Default value: on)
If this option is enabled, then the content of this field will automatically be
incremented by +1 when a new sample data line is created.