7 modifying autostart counter, 8 determination series - determination run – Metrohm tiamo 2.1 (ProcessLab) User Manual
Page 157
■■■■■■■■■■■■■■■■■■■■■■
3 Workplace
tiamo 2.1 (ProcessLab)
■■■■■■■■
141
Remarks
Freely definable remarks concerning the determination, that are saved
together with the determination. Prepared sample texts can also be selected
instead of making manual entries (see Chapter 3.5.1, page 115).
Input
100 characters
3.6.4.7
Modifying autostart counter
The dialog window Live modifications, in which the autostart counter can
be modified live in a determination while it is running, opens with the con-
text-sensitive menu item Modify autostart counter.
Autostart
Number of automatic, internal starts of determinations within a sample ser-
ies.
The first field which cannot be edited after Autostart shows the number
of determinations already carried out (actual counter).
The second field which can be edited after Autostart shows the total num-
ber of determinations per series that are still to be carried out (Setpoint
counter).
Selection
1 … 999 | Sample table
Default value
Sample table
3.6.4.8
Determination series - Determination run
Tab: Workplace
▶ Run ▶ Determination series
For a series of determinations that is started on the tab Determination
series in the subwindow Run, each determination proceeds as follows:
1 - Loading the sample data
The sample data for the determination entered on the current line in the
Working sample table is loaded.
2 - Method selection
The following actions are triggered with method selection:
■
Method selection without Assignment ID
The method selected in the column Method is loaded.
■
Method selection by assignment ID
If the option Method selection by assignment ID is enabled in the
properties of the determination series on the tab Process (see Chapter
3.3.2.4, page 107), then the method defined in the sample assignment
table will be loaded (see Chapter 3.4, page 113).
3 - Start test
The following checks and actions are triggered with start test: