Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 435)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 419
Fixed value
on | off (Default value: off)
If this option is enabled, then the method variables can be assigned a fixed
value. For variables of the type Date/Time, the date must be entered in the
dialog window 2.5.1Select date. No formulas can be entered in this field.
Type = Number
Range
-1.0E-99 ... 1.0E+99
Type = Text
Input
100 characters
Type = Date/Time
Selection
'Date'
Check at start
on | off (Default value: on)
If this option is enabled, the start test will check if the method variable is
valid and if the limit values are maintained when monitoring is switched on.
Note
Switching off this option can be useful if the method variables are still
invalid at the start of the method and will not be defined until there is a
REQUEST command during the run.
Comment
Freely selectable comment on the method variable.
Input 1000 characters
Variable monitoring
Note
Is displayed only for method variables of the types Number or Date/
Time.
on | off (Default value: off)
The limits for the variable will be monitored while the determination is run-
ning if this option is enabled.