Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 374)

4.8 Curves subwindow ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
358 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
For BRC commands
Selection
Time [s] | Measured value | Amount [µg] |
Charge [mAs] | Drift [µg/min] | dV/dt [µ/min] |
Ugen | Igen [mA] | Calculated 1...3 | External
1...3
Default value Time [s]
For MEAS commands
Selection
Time [s] | Measured value | dMW/dt | Tempera-
ture [°C] | Calculated 1...3 | External 1...3
Default value Time [s]
For MEAS T/Flow commands
Selection
Time [s] | Measured value | Flow [ml/min] | Cal-
culated 1...3 | External 1...3
Default value Time [s]
For MEAS TC Cond commands
Selection
Temperature [°C] | Measured value | Time [s] |
dMW/dt | Calculated 1...3 | External 1...3
Default value Temperature [°C]
For MEAS Ref commands
Selection
Wavelength [nm] | Intensity [Counts] | Intensity
Dark [Counts] | Transmission [%] | Saturated
pixels
Default value Wavelength [nm]
For MEAS Spec commands
Selection
Wavelength [nm] | Absorbance [mAU] | Inten-
sity [Counts] | Intensity Dark [Counts] | Intensity
Ref [Counts] | Transmission [%] | Saturated pix-
els
Default value Wavelength [nm]
For MEAS Opt commands
Selection
Time [s] | Measured value | Intensity [Counts] |
Transmission [%] | Saturated pixels
Default value Time [s]
For CAL Spec-commands
Selection
Wavelength [nm] | Intensity [Counts] | Satura-
ted pixels
Default value Wavelength [nm]