Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1238)

6.3 Configuration data ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1222 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
￭ tiamo multi
Make sure that tiamo is closed on all clients connected to the server
and on the server itself.
2 Start restore program
￭ tiamo light, tiamo full
Start ConfigRestore.exe in the program directory …\tiamo\bin.
￭ tiamo multi
Start ConfigRestore.exe in the program directory …\tiamo\bin
on the server.
The dialog window Restore configuration data opens.
3 Select backup file and start restoring
Select the required backup data in the dialog window Restore con-
figuration data and then click on [Start.]
Dialog window "Restore configuration data"
Backup directory
Selection of a directory predefined in the Program administration that con-
tains the backed up configuration database.
Selection Backup directories
Backup name
Selection of a backup file.
Selection Backup files
Backup date
Shows the time at which the configuration database was backed up. If the
backup file is located on a network drive, this information is not available.
Database name
Shows the name of the configuration database. If the backup file is located
on a network drive, this information is not available.
Size
Shows the size of the configuration database in KB.
Save as
Name under which the configuration database will be restored.