Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1225)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1209
Selection on | off
Default value off
FDA default: on
Range 1 ... 60 min
Default value 10 min
FDA default: 10 min
Remove password after signature
If this check box is enabled then the password must be entered again after
each signature.
Selection on | off
Default value off
FDA default: on
Sign each determination separately
If this check box is enabled then each determination contained in the
determination overview must be signed individually.
Selection on | off
Default value off
FDA default: on
6.2.2.6 Default reasons
Tab: Configuration ▶ Tools ▶ Security settings ▶ Default reasons
On the tab Default reasons the reasons are defined that have to be entered
when methods and determinations have to be signed for, or when methods,
determinations and sample data are modified.
Category
Selection of the category for which the reasons are to be defined.
Selection Signature Level 1 | Signature Level 2 | Modifi-
cation of methods | Modification of determina-
tion | Modification of sample data
Default value Signature Level 1
Reasons
Shows the reasons defined for the selected category.
Input 50 characters
Moves text upward (modifies sequence).
Moves text downward (modifies sequence).