Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1221)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1205
Selection on | off
Default value off
FDA default: off
Note
If the automatic logout is enabled (see below) only the same user or a
user with administrator rights can log in again independent of these
option settings.
No editing of workplaces in 'BUSY' status
If this check box is enabled then, after a user has logged out manually, a
newly logged-in user on the workplaces still open with running determina-
tions can neither edit data or trigger actions. Such workplaces will only be
available again when all determinations are finished. For running determi-
nations the old user name always applies (Audit Trail entries, Save, Export,
etc.). Exceptions are the stop of a determination with [Stop] and the emer-
gency stop, which are always possible for all running determinations and
series.
If this check box is disabled then the newly logged-in user will have all the
rights for the opened workplaces that his/her group assignment authorizes
him/her to. For running determinations the new user name applies imme-
diately (Audit Trail entries, Save, Export, etc.).
Selection on | off
Default value off
FDA default: off
Automatic logout after
If this check box is enabled then the user will be logged out automatically
when no operating functions have been carried out with the keyboard or
the mouse within this time. After this automatic logout, only a member of
the same user group as the one to which the previously logged-off user
belongs or a user with administrator rights can log in again.
Selection on | off
Default value off
FDA default: off
Range 1 ... 60 min
Default value 10 min
FDA default: 10 min