Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1417)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Devices
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1401
Display message
A message is displayed and you can choose whether you want to con-
tinue the run or cancel it. If the run is continued then the message that
the validity period has expired will be automatically saved with the deter-
mination.
Stop determination
The running determination will be automatically terminated. The follow-
ing message must be confirmed with [OK].
7.13 864 Balance Sample Processor
7.13.1 864 Balance Sample Processor - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties ▶ Properties - 'Device
type' - 'Device name'
The parameters for the device 864 Oven Sample Processor are set on
the following tabs:
￭ General
General device information such as device name, device type, serial num-
ber, etc.
￭ Tower #
Properties of Tower 1 and Tower 2 (if present).
￭ Rack
Information on the rack attached.
￭ MSB #
Properties of the MSB connector 1...3 and the peripheral devices con-
nected to.
￭ GLP
Information on GLP tests and GLP monitoring.
7.13.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
General properties of the device are displayed on the General tab.
Device name
Designation of the device (can be freely defined by user).
Input 50 characters
Default value Device type number_#
Device type
Display of the device type.