Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 752)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
736 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Range 0 ... 999999 s
Default value 1 s
Pause 1
Pause 1
Waiting time, e.g. until the electrode has settled down, before a start volume
is added.
Range 0 ... 999999 s
Default value 0 s
Start volume
Start volume
Volume to be dosed with the indicated dosing rate before the start of the
titration .
Titrando
Range
0.00000 ... 9999.99 mL
Default value 0.00000 mL
Titrino
Range
0.00 ... 999.99 mL
Default value 0.00 mL
Dosing rate
Speed at which the start volume is to be added. The maximum dosing rate
depends on the cylinder volume of the exchange unit or dosing unit used.
Titrando
Range
0.01 ... 166.00 mL/min
Selection maximum
Default value maximum
Titrino
Range
0.01 ... 150.00 mL/min
Selection maximum
Default value maximum
Pause 2
Pause 2
Waiting time, e.g. for the electrode to settle down after the start or a reac-
tion time after the addition of the start volume. The pause follows at the
end of all the start conditions.