Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1536)

9.2 Backup ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1520 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
2 Click on the menu item File ▶ Backup ▶ Manually.
The dialog window Backup configuration data manually opens.
3 Select the directory for the backup in the field Backup directory.
4 Select or enter the name for the desired backup file in the Backup
name list box. If an existing backup file is selected it will be overwritten.
.
Note
If the backup directory is on a network drive. the backup date should
be added manually to the Backup name because the backup date
information is not available when the directory is restored.
5 Click on [Start].
The manual backup of the configuration database is started.
Backing up configuration data automatically
1 Select program part Configuration.
2 Click on menu item File ▶ Backup ▶ Automatically.
The dialog window Backup configuration data automatically
opens.
3 Activate the Automatic backup check box.
4 Enter Interval for backup monitoring or date for the Next backup.
5 Select the directory for the backup in the field Backup directory.
6 Click on [OK].
The dialog window Backup configuration data automatically is
closed.