Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 794)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
778 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Ipol 10 µA 20 µA 30 µA
EP 50 mV 100 mV 150 mV
Dynamics 70 mV 100 mV 120 mV
Max. rate
Maximum rate with which iodine is generated outside the Control range.
Range 1.5 ... 2240.0 µg/min
Default value 1000.0 (slow), maximum (optimal), maximum
(fast) µg/min
Selection maximum
Min. rate
This parameter defines the minimum rate with which iodine is generated
inside the Control range. The smaller the rate the slower the titration and
the higher the accuracy.
756, 831
Range
0.3 ... 999.9 µg/min
Default value 0.3 (slow), 15.0 (optimal), 30.0 (fast) µg/min
Selection minimum
851, 852
Range
0.3 ... 999.0 µg/min
Default value 0.3 (slow), 15.0 (optimal), 30.0 (fast) µg/min
Selection minimum
Stop criterion
Stop criterion
Switches off titration when the endpoint has been reached and the stop
criterion has been met.
756, 831
Selection
drift | rel. drift
Default value rel. drift
851, 852
Selection
drift | rel. drift | time | off
Default value rel. drift
Stop drift
The titration is stopped when the endpoint and the stop drift have been
reached. This parameter is only shown for Stop criterion = drift.