Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1451)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Devices
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1435
Data storage under legal control
Indicates whether the balance has its own calibratable data memory.
Only visible and editable with Sartorius balances.
Selection
on | off
Default value off
Remarks
Remarks about the device.
Input 1000 characters
Default value empty
7.18.4 Properties - Settings
Tab: Configuration ▶ Device ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Settings
Barcode reader ID
Shows the identification of the barcode reader.
Input target
Selection of the field into which the output from the barcode reader is to
be entered.
Selection Active input field | Method | ID1…16 | Sample
size | Sample size unit | Sample position
Default value Active input field
[Connect]
Establishes a connection to the barcode reader. The dialog window Estab-
lish connection (see Chapter 7.18.6, page 1437) appears.
[Disconnect]
Disconnects the connection to the barcode reader (only then the device can
be deleted out of the configuration).
7.18.5 Properties - GLP
Tab: Configuration ▶ Device ▶ [Edit] ▶ Properties... ▶ 'Properties - 'Device type' -
'Device name' ▶ GLP
GLP test date
Date of the last GLP test. This date can be selected by clicking on in the
dialog window Select date (see Chapter 2.5.1, page 79).
Comment GLP test
Comment on GLP test.