Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1156)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1140 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Event/
Status Type Significance Com-
mands
Start Event Command has been started. All
End Event Command has been finished. All
Dosing Event The dosing of the titration has been
started. DET, MET
Measure Event The measurement of the titration
has been started. DET, MET
Busy Status System is in status BUSY, HOLD or
ERROR. All
Finished Status Command has been terminated at
least once. All
Cond Status The command is currently in Con-
ditioning status (COND BUSY or
COND HOLD); the Start drift has
not yet been reached. SET, KFT,
KFC
Condok Status System is in Conditioning status
(COND READY); the Start drift
has been reached. SET, KFT,
KFC
Note
An event can only be received as such if the RECEIVE command has
been activated at the time of the event. A status, on the other hand, can
be queried at any time.
Comment
Comment on the event message
Input 250 characters
Default value 'empty'
5.6.9.6 TRANSFER
5.6.9.6.1 TRANSFER - Overview
Dialog window: Method ▶ TRANSFER ▶ Properties... ▶ TRANSFER - 'Command
name'
Command for data transfer via RS-232 to external devices.
Appearance
The command has the following appearance: